How to Clean a Bong in Less Than 3 Minutes – The Ultimate Guide!
A clean bong is a happy bong, but some times you just don’t have the time to spend all day scrubbing and cleaning a bowl. There has to be a better way to keep your pot bong squeaky clean without the hassle.
There are a few quick ways to clean your bong parts at home:
- Purchasing a resin cleaner or any of the other smoking pipe cleaners,
- Using apple cider vinegar and baking soda for cleaning your bong,
- Making an alcohol vinegar cleaner,
- Boiling water in glass bongs,
- Using a combination of coarse salt and alcohol.
The method we will be focusing on in this guide is the alcohol and salt method, as we find it to be the most effective at the lowest cost. If you choose to clean bong with vinegar, it’s just as effective but make sure you use baking soda instead of salt.
Whatever cleaning method you choose, a bit of elbow grease goes a long way to increase your smoking experience.
Looking for a glass piece that’ll inspire a regular cleaning process?
The Panda Specialty Slab 18″ 9mm beaker bong from Mav may be just what you’re looking for.
Don’t let your bong sit around covered in grime, especially when cleaning is so simple! @littlestheadshop
Best way to clean a pipe
There are many different ways to go about cleaning a pipe, but our preferred method is with alcohol and salt. This method is one of the least expensive options, involving items most people keep in their homes. We prefer this method for cleaning glass bong bowls, but it can be useful for cleaning dab rig or a silicon bong.
Other common ways to remove resin buildup involve using bona fide bong cleaners such as Kryptonite or Formula 420. You’ll also find ways to clean with warm water, lemon juice and coarse salt, which is a great option for an all-natural cleaning method.
We don’t recommend using dish soap, and we definitely don’t recommend using carburetor cleaner, no matter how much resin buildup there is. There’s just no way to be sure you rinsed the chemicals from something like that off of your beautiful bong before lighting it back up again!
Here’s what you’ll need for our favorite way to clean glass bong:
- Warm Water
- 70% Unscented Isopropyl Alcohol or higher (the higher the percentage the better; we recommend 90% isopropyl alcohol)
- Salt – the coarser the better!
- Cotton swab or something like a q-tip
- Hand Towels
- Small baggies, storage containers, or mason jars
- Bottlebrush or pipe cleaner (optional)
With the Jay and Silent Bob Percolator Beaker Ice Bong, the desire for smooth tokes will persuade you to never commit the sins of hitting from a dirty bong.
Keep the resin build up clear and the bong water clean, and the smoke will rise from the beaker base, pass through the showerhead percolator and ice catch and cool every heavenly toke you take.
Supplies needed are minimal. You most likely already have them! @Green Rush All rights reserved.
How to clean a bong – step by step guide
Step One: Empty the bong and take it apart
Step Two: Rinse every piece of your bong with warm water
Step Three: Place each bong piece in its own container
Take all the loose pieces (except the bong base; that’ll be cleaned later) and place them in their own independent containers. Then, pour at least 1/4 cup of 70% (or higher) rubbing alcohol and at least one tablespoon of coarse salt in each container.
For the larger pieces that are in larger containers, we recommend using 1/2 cup of rubbing alcohol and two tablespoons of salt. Don’t stress over the proportions; they don’t have to be exact. This cleaning solution of isopropyl alcohol and coarse salt gives you some real cleaning power, as you’ll soon see!
Step Four: Shake the containers carefully
Seal the containers up and shake them carefully, but enough to get the mixture really moving inside. Be careful and ensure the container is safely sealed; these pieces are glass after all. This will help to move the salt/alcohol solution throughout the pieces of your bong, working to break up the marijuana residue built up inside.
Let the small pieces soak for 10 to 15 minutes and then return to shake again. This will help reduce the time you’ll need to spend scrubbing with bong brushes. This will also make it much easier to figure out how to get resin out of a bowl quickly if you don’t have a bong brush or bong cleaners.
Step Five: Cleaning the bong base – pour salt in the bong base
Pour two to three tablespoons of salt (we recommend three) into the base of your bond. If you have a bigger bong, you may need to add up to four or five tablespoons; use your best judgment.
You want to put enough salt in the bong that some remains undissolved in the solution to increase the abrasiveness, helping to loosen the bong resin.
Step Six: Add alcohol to the bong base
Step Seven: Plug the holes of the bong base and shake
Using your hand towels, plug the holes in your bong base to keep the alcohol inside as you shake it up. You can also just use your hand, plastic wrap, or even cotton balls if the holes are small enough. Or, if you have them, you can use bong plugs.
Shake the bong vigorously to get the alcohol/salt solution throughout all areas of the bong base, continuing for over five minutes. Remember, every minute you spend doing this is a minute less you have to scrub with a brush.
Step Eight: Rinse everything thoroughly with warm water
Just as you did initially, you’re going to want to rinse everything with warm water, the hottest water you can stand. This will ensure you get all the salt and alcohol out of the bong.
If some resin stains and/or water stains remain, as is often the case, break out the bong brush or some handy Q-tips to scrub it away. Once you’re done rinsing and scrubbing, rinse them again, then set them out to dry.
Interested in some of the finest products to help simplify the bong cleaning process? Check out some of our favorites!
|Bong Blaster Bong Cleaner Powder||Resölution Bong Cleaning and Transport Caps||Crud Bud Dual Tip Cotton Buds|
Tips for the best way to clean a weed pipe
Now that you know how to clean a glass weed pipe, it’s time to give you some pro-tips to ease the process.
- You can repeat this process, giving your pipe two thorough cleanings if you haven’t cleaned it in a while.
- Doing this monthly will make it easier to clean it in the future and prolong the life of your bong
- You can also boil vinegar to remove smoke odour
- Boiling alcohol is unnecessary
- Try to avoid inhaling rubbing alcohol
- Be careful to use only pipe cleaners, bong brushes, or Q-tips to scrub the resin off your piece so you can avoid tiny scratches from appearing on your glass bong.
You’ll be smiling when you have your reinvigorated glass. @sbbongcleaning
Now that you know how to clean a pipe with rubbing alcohol, you’re all set to properly maintain your bong in the cheapest and most effective way. As we said above, there are many ways to clean your bong, so if this method doesn’t work for you, don’t stop searching for the right one! This method can also work well on a silicone bong. Hopefully now you can see that, though you’ll need more than a quick rinse with running water, bong cleaning certainly doesn’t have to be a difficult or time consuming process, and it’s well worth it when you see your beautiful bong friend shining bright once again!
If you’d like to know more, you can research the following topics:
- Can I use hydrogen peroxide to clean my bong
- How to clean a pipe without alcohol
- How often should you clean your bong
- The best cleaner to use on your glass bong
- How to protect your bong from breaking
Cheers to clean bongs that make happy stoners! When cleaning your bong can be done in a small number of very easy steps there's really no excuse to let your precious glass sit there covered in residue! In this article we'll walk you through the steps needed to get your glass gleaming again. It really is so simple, so let's get started!
The Ultimate Guide: How to Clean Your Bong, Glass Pipe, and Bubblers
When it comes to smoking, glass is one of the most preferable choices among all materials. Whether you are using a glass pipe, a bong, or a dab rig, it will get dirty after some time. That’s because gunk builds up over the time from all the smokes and burnt materials. Not only that you may find your piece with a clogged airflow, but it will not taste as fresh as once it was. More towards that, it can increase the chances of growing molds and bacterias, which is extremely harmful to health. That’s why we would like to share with you a few tips on dealing with the mess.
There are few major hurdles you will find when it comes to cleaning a glass pipe or a bong. A common example is that you will find a dirty spot very hard to reach, it could be the inside of the glass pipe or the percolators of the bong. That’s why the main method we would like to introduce by using the right solution and keeping it simple by following the rules of thumb: soak it, rinse it, and scrub it. This will help you to clean a majority of the area of your glass pipes or bongs.
Choosing the cleaning solution
When it comes to choosing your perfect solution, there are two main combinations we recommend. Either to use isopropyl alcohol with salt or to use white vinegar with baking soda.
Quick and aggressive: isopropyl alcohol with salt
If you are looking to speed-clean your dirty glass pipes, isopropyl alcohol with salt is the best option. We recommend using any rubbing alcohol you could buy from a pharmacist or supermarket with at least 70% alcohol, preferably 91% of alcohol. The higher the percentage of the alcohol content, the quicker the cleanse you will likely to get. Salt or essentially sodium, acting as a rough medium not only helps to remove the tars physically but also covers the tough part of the gunk. When it reacts with alcohol, it creates bubbles of hydrogen gas and a corrosive sodium ethoxide. This process helps with softening the tars and the remain solution is also great for cleaning the residuals. Any iodine-free table salt will work just fine. We highly suggest choosing fine salt over rock salt, since smaller salt can cover more areas.
However, using isopropyl alcohol can be a little dangerous. Inhaling alcohol with high percentage content is bad for health. 70% of alcohol is also highly flammable. You will need to make sure giving a thorough rinse with water after cleaning with alcohol because the remaining alcohol on your gears can catch fire in the worst case scenario. Nobody wants to set fires on your bongs or glass pipes when you just want to sit back and chill, what a disaster would that be just by imagining.
Ease of cleaning: ★★★★
Health and Safety Hazards: ★★★★
Cleaning time: Short
Safe and house-friendly: white vinegar + baking soda
If health and safety is your main concern, you may want to look for these two items you can find in your house: White Vinegar and Baking Soda. Vinegar is the perfect remover for resin and wax, it is also a natural deodorizer, while baking soda acts as a water softener. When you try to mix baking soda with vinegar, it immediately creates a frizzly reaction that produces gas carbon dioxide and slightly abrasive solution. This helps to cut through any forms of grease and leave your bongs or glass pipes gleaming. It may not work as fast as using alcohol, but It’s 100% safe with zero hazards. Unlike alcohol, it absorbs odors leaving with no smells on your glass pipe.
Ease of cleaning: ★★★
Health and Safety Hazards: None
Cleaning time: Allow at least 1 to 2 hours for soaking
Choosing your cleaning equipment
Besides the cleaning solution, you may also require two other items to help you clean:
A Ziploc bag or a plastic food container: This is perfect for cleaning a glass pipe, bubbler, bowl piece or any attachments of your bongs and dab rigs.
Cotton tip or brush: Some gunks may be stubborn to come off, that’s why you may need a little physical assistance.
How do you clean them?
Using a Ziploc bag for cleaning glass pipes, bong bowl, or other attachment
Cleaning bongs and dab rigs
What we do recommend
The first thing we do recommend is not to leave your bong water overnight.
We would also recommend cleaning your glass pipes or bongs daily, the longer you leave it dirty the more difficult to clean. It only takes 10 minutes and you will appreciate it.Simple ways for cleaning a dirty bong, dirty glass pipe, dirty bubbler, dirty glass spoon, dirty weed bowl, dirty percolators, and any other bong attachments. How do you remove tars and resins off your bong, glass pipes, bowl pieces, and bubblers. Built-in ash-catchers and built-in percolators can be clean easily with a simple few steps ]]>