Fix Pencil Torch
Introduction: Fix Pencil Torch
This instructable may be a bit silly, but as for me, ive thrown about 10-15 of these pencil torches away (common cheap blue one) because I couldn’t find a solution to this simple problem that I recently just figured out! This will fix the flame when it is shooting out of weird directions or coming out in the way of a flame instead of torch
Step 1: Unscrew Tip
Blow lightly both ways inside the torch tip but be careful when you are blowing the opposite direction of the way that the fuel comes out because there is A valve stem thing that can be blown out of place. if thats the case just poke it back into place and it will be fine. As I did so myself lol
Step 2: Screw On, Fill Up, Fire Up!
A torch fill should take no longer than 10-15 seconds. The fill action depends on differential pressure between torch & fuel can, & this is highly dependant on temperature. To get a maximum fill, put the torch in the fridge for 10 minutes before filling. Warm the fuel can with your hands, or by putting it in your pocket for a while. This way, you will get a maximum fill every time. Filling a warm torch will lead to a poor fill. Another tip: Before filling, press the fill valve in the torch & release a short squirt of gas. This will blow any crap in the fill stem away, & prevent it from being blown into the torch. Doing this every time leads to a much longer torch life.
Be the First to Share
Did you make this project? Share it with us!
Battery Powered Contest
Question 1 year ago on Introduction
Where is the valve stem I can’t seem to find it
Question 1 year ago on Step 1
I have a new pencil torch, it will not light?
Question 2 years ago
I blew out the valve stem it’s gone can I still use the torch?
Answer 1 year ago
Did you find out how to fix it
I blew my stem out how do I make it work
I recently bought two pencil torches and followed your instructions. I lit the torches and they both have a flame like a lighter than like a torch. What needs to be done in order to fix this issue. If anything.
Hi. If you want the torch to stay unblocked and work properly for a long time do this when it’s new. Unscrew the top nozzle, it’s locktited on so if it’s stubborn heat the nozzle with a cigarette lighter to soften the locktite and then turn anticlockwise to remove. Get a piece of multistrand electric wire and strip off the insulation to leave bare straight multiwire. Cut off a 25mm length and push this into the gas feeder tube (the tube below where you screwed off the nozzle). Get as many strands in as you can and push them down and then remove any wire protruding out the top. screw the nozzle back on and viola a torch that doesn’t clog everytime you use it. the wire filters out any crap and ensures the gas is not liquid when it enters the minute oriface. Mine has not clogged since.Fix Pencil Torch: This instructable may be a bit silly, but as for me, ive thrown about 10-15 of these pencil torches away (common cheap blue one) because I couldn't find a solution to this simple problem that I recently just figured out! This will fix the flame when…
5 Best Pencil Torches (2020) – Reviews & Top Pick
Are you willing to buy a pencil torch for soldering?
Or are you a hobbyist who is planning to do some artwork on wood or soft metals?
Do you want to fix your jewelry with precision?
There is only one solution to your problem, and that is a butane pencil torch.
I know how hard it is to reach a conclusion in case of purchasing a butane pencil torch.
I have also experienced the whole process and that is why I am here to help.
I have come up with the best deals for you among so many options available.
The listed items are strong, durable, safe, and might fit your requirements.
They are trending in the market and are best for soldering, melting pipes, electrical wiring works, etc.
Let’s dive right in.
5 Best Pencil Torch Reviews
1. Dremel 2000-01 VersaTip Precision Butane Torch – Top Pick for Multi-Purpose Use
Are you a creative worker and involved in a detailed project?
Then Dremel 2000-01 is the ideal product for you. The product comes with the precision and versatility you need.
The pencil torch is portable and is able to cut, melt, heat, and make decorative burns in a wide range of tools.
There are many reasons behind keeping this product at the top of the list. Let’s start with the features.
Attractive Key Features:
The versa tip torch comes in a metal box along with many parts to work with.
The full set is a complete working set and gives you a wide range of options and facilities to work.
The shaping knife tip helps you to shape any metals while working.
If you are even in need of cutting anything, there is a cutting knife for you as well. The cutting knife melts the ends while cutting and gives you perfect ends.
There is also a wide blower tip, a soldering tip, a hot air tip. You can use each and every one of them as per your working needs.
There is also a protective cap to protect the tips of your torch.
The torch comes with a child safety lock which prevents the children around from getting harmed, as well as unwanted ignitions.
You have to pull the lock and press the button for the torch to light. The torch runs through butane and as a result, there is no risk of getting contact with electricity.
You can control the level of the flame and lock it at the level you prefer it to blow.
There are two buttons attached in the torch so that you can have a fixed level of flame in your blow torch which will help you to cut or melt with precision.
Dremel 2000-01 VersaTip is a perfect set of tools for hobbyists, artists, and designers.
The torch is ideal for burning, pyrography, shrinking, cutting, melting, etc. The torch can also perform on a wide range of metals which is a bonus for any hobby or craft projects.
You can do some electrical repairs such as joining cables, melting tips, etc.
As I have mentioned earlier, you can limit the level of fire in the torch. As the flame level is adjustable, you can adjust the temperature from 1022 F – 2192 F.
The light is refillable and the lighter is powered by butane. A full tank can work for you up to 75 minutes.
The tips of the pencil get extremely hot. So, after using it, do not touch or intend to change the tip.
Wait for it to cool down for a few moments. Do not use the protector cap when it is hot, it might melt as well.
I think now you have got why this pencil torch is at the top of our list. This is a complete package for its users. If you are a hobbyist, an artist, a jeweler, and in need of precision and full control over your flame, then this is the best product you might ever find. The versatility and ease of use makes it one of the best products in the market.
2. Mini Jet Pencil Flame 503 Torch – Fit For Lite Tasks
Are you looking for an effective and convenient pencil torch for soldering?
This is an amazing butane run pencil torch which makes a tedious task into a pleasure. It is smooth to operate and use.
The torch is easy to refill and comes with some amazing features. This is not just all, there are many more about it.
Attractive Key Features:
Easy to use:
When you have it in hand you might get confused seeing all the instructions written in Chinese. Let me explain to you the whole operation.
At first, you have to fill it up with the required fuel. There is a red slider switch, make sure that it is pushed upwards. This slider allows you to use the lighter with two modes. The “lighter” mode and the “torch” mode.
Then you have to slide the black switch on to let the gas come out. As soon as you do that, just click on the ignition button at the bottom of the torch. This ignition button feature makes this torch really easy to use. You can also control the level of flame as per your needs. There is a slider switch installed for that as well.
As you can use it as a regular lighter and a pencil torch, I hope you get how versatile the usage can be.
You can use this to soldering electronics, fix jewelry, light fire, etc. If you want then you can use it as your regular lighter too.
Though the size does not allow you to carry it in the pocket.
Works in outdoor conditions:
If you are intending to work outside the home in the cold or the rainy weather then this pencil torch is a godsaver.
It starts fires and works very well. Just make sure the gas you put into it is not cold.
If so, then it might bother you while working. Make sure the gas is in normal temperature before you fill in the torch.
Heats wiring wraps:
While doing electrical wiring wraps you have to be very careful about the modes.
In “lighter” mode, it is just a general butane lighter.
On the other hand, In torch mode, it is just an intense and focused jet torch which will burn as well as melt things.
Do not worry if you run out of fuel in the torch. You won’t have to buy a new one again.
You will find standard butane cans in stores. There is a nozzle in the lighter on which you have to press the tip of the can hard and it will fill the lighter with fuel.
If you are using a butane powered lighter, be sure that you are using a good fuel. The impurities in the cheap fuel might damage the product. In the worst-case scenario, it might explode.
Not for welding:
The flame can be adjusted up to 1300℃ for use. This is not enough temperature to work with metals. The tool might be able to do some small tasks, but welding is not its deal.
The most important thing about this tool that you have to consider is that you have to be always alert and turn it off. If you forget to turn the switch off, unwanted accidents are likely to happen.
At the end, I want to tell you that this pencil torch is simply a little bit more than your average lighter but can perform the tasks of a pencil torch.
You can fire a bonfire, make a fire in a BBQ machine, do jewelry fixing, etc.
Moreover, the lite and easy tasks can be done with ease using this amazing pencil torch. If you are expecting more, then this might not be the best torch to choose. Move to the other ones below.
3. The PT4000 Pencil Torch- Long Life
The PT4000 pencil torch is an amazing pencil torch from “Blazer”. It has a slim design which makes it light-weight. The slim design also makes it easy to grip in any environment.
The pencil torch lights instantly with a press at the ignition button located at the back of the torch.
You will be happy to see the matt black finish of the pencil torch. This means you will definitely get what you pay for.
Attractive Key Features:
The pencil is 6 and a quarter inch which ensures portability to its users. The pencil torch only weighs 0.2 ounces and the matt black finish of the body makes it look attractive as well.
The pencil torch tanker has the capacity to contain 4 gm gas inside it. At its maximum volume, the torch can continuously burn for 30 minutes.
You do not have to use any additional flame to make the torch-light. Just push the button up to let the gas come out.
Once you turn on the butane, the pressing of the ignition button at the end of the torch ignites the flame.
With a flame temperature of 2500 degrees, the pencil torch can cause unwanted accidents.
Well, you do not have to worry about that. The torch flame comes with a manual lock of the ignition. This prevents the torch from getting ignited.
The flame is adjustable with a flame range from 0.75 to 2 inches. You can adjust the flame as per your working needs. The adjustment wheel inside is made of brass and is extremely durable.
The pencil torch is undoubtedly durable and well made. You just have to make sure that the knob doesn’t loosen up.
The PT4000 Pencil Torch is ideal for lab works, soldering, heat tubing, typical electronic, and jewelry repairments. The flame is sharp and you can finish your work with precision.
The torch has a pull-down stand for hand-free works. If you need your hand to work, pull-down the stand and start working.
The pencil torch is run by butane. The butane can is separately sold by Blazer.
If you try to refill the pencil torch using other cans, the impurity of the gas might clog the nozzle. You might not be able to fix it once it gets clogged.
Every time after using the pencil torch, you have to be careful about turning off the switch.
People are often found clicking the ignition button to turn the torch off. If you forget to turn the gas off, unwanted accidents are likely to happen.
To end with, I want to tell you that blazer has manufactured a quality product for both professional and personal usage. The pencil torch has all the features a pencil torch should have. Just be mindful to turn the switch off the button after use.
Apart from that, you can use the blazer butane canister which is sold separately. This is also a great product and will help you run your torch more smoothly.
4. LONDAFISH Kitchen Culinary Outdoor Jet Torch – For Professional Uses
Londafish has come up with a pencil torch lighter which is well manufactured and good looking. The Pencil torch has a versatile use, and it is full of features. The manufacturing quality of the product makes it durable and reliable. You will be satisfied with the look at the features.
Attractive Key Features:
More than ordinary lighters:
If you are a cook or a foodie you can use this pencil torch lighter to caramelize food. It is the ideal lighter for both indoor and outdoor needs.
This means you can use this product for indoor activities such as DIY jewelry erasing, Soldering, grilling, camping, etc.
On the other hand you can use this product to light cigarettes, cooking, and any outdoor traveling activities.
After a refill of the pencil torch, you will not have to worry about the amount of gas left in the torch.
The transparent gas window helps you to understand the gas capacity. This also helps when you are refilling the lighter torch as well.
There is a flame adjustable control installed in the torch. The wheel is easy to operate and easily adjustable.
There is an air box made in the lighter which does not leak easily and so there are fewer chances of exploding.
The button lighter also has a functional feature that locks the lighter and prevents unwanted ignition.
The lighter is made of plastic and metal. This makes it a durable lighter and workable in rough conditions.
The length of the lighter is only 5.13 in which makes it fit in your palms. You can hold it in your hands, in your pocket, and bag.
Made of plastic:
By plastic, I did not mean entirely. There are some parts which are made of plastic. Other than that there are fewer things to consider in this lighter.
As there are fewer things to consider about this pencil torch, this might be a great deal for you. The pencil torch is capable of doing both professional and domestic work.
You might not find such a pencil torch lighter which ensures this much safety with so many workable features.
If you think this is the one which you have been looking for, then feel free to purchase it.
5. WIOR Torch Lighter, Refillable Butane Lighter – For Home Uses
Are you looking for a lighter which is capable of meeting all the purposes of yours?
Well, I can not promise to fulfill all of your demands. But, I am sure this will fulfill pretty much of it.
This is a blue flame butane pencil torch which has a high-temperature flame.
Do not rush it, go check out the features of this pencil torch. You might not be disappointed or who knows? You might find what you have been looking for.
Attractive key Features:
The pencil torch is made of Zinc alloy and plastic. The pencil torch is capable of containing 1.8 g gas inside it.
The temperature of the flame is 2100 F. The manufacturer says that you can use it 500 times in case of common firepower.
Safe to use:
The pencil torch lighter comes with a safety lock feature that prevents any misuse by the children. This also prevents any sort of unwanted ignitions as well.
The lighter’s flame quality is named as a turbo-jet flame. This is totally windproof and can light up in windy conditions. The flame is hot and effective as well.
Do not worry when the butane pencil torch is out of gas. You can refill the torch by following some easy steps. Be mindful of shaking the lighter for several times after the gas is filled.
There is a fuel adjustment wheel in the torch. You can control the height of the flame using the wheel. Just move the wheel as per your intentions and desired flame.
The easy adjustable lighter is great for both indoor and outdoor activities. You can use it as a candle lighter if you want. You can also use it for BBQ grill lighting, camping lighter, etc.
The small dimension and weight of the pencil torch makes it a portable and comfortable torch to work with. It is easy to carry and fits anywhere you want it to fit.
Not for welding:
If you are intending to weld using this lighter, then this is not the product for you. You can do soldering, wire wrapping, etc.
This is all about this slik and good looking lighter. This is a durable and stylish product which is also a great performer.
You can use this for your day to day chores without any disappointment. If you are looking for a useful butane refill torch. Then, this is undoubtedly the best deal.
Before buying any product you have to be careful about many things.
The same thing goes for the pencil torch.
Before making a purchase there are some things that you need to look after. Though there are not so many.
Yet, the available ones are the most important ones.
1. Meeting purposes:
It should have the first priority before making the purchase of any pencil torch. Ask yourself some questions before making a decision.
Why do you want the torch for?
You must select a torch as per the answer to this question. Do you want it for professional needs? Or the general household and outdoor firing activities?
Make a decision as per your answer.
Does it have to be more than regular lighters? Or,You are just planning to light cigars with it.
Yes, the pencil torches come as single or as a set. The ones with a whole set are the ones which are capable of doing a little bit harder tasks than the regular ones. They are multi-functional and have a wide range of usage.
Do you want portability?
The pencil torches come in various shapes and sizes. There are also sizes available which might even fit in your pocket.
As I have said earlier, there are pencil torches of different kinds. Using some pencil torches you will be able to do soldering, lab works, wire tubing etc. Works like fixing jewelleries can also be done with precision by using a perfect pencil torch.
3. Safety measures:
If your pencil torch is not durable then there are chances of meeting unwanted accidents. Look for as many as possible safety measures. The more the features, the safer it is to use.
The capacity of holding gas inside depends on the shape and size of the pencil torch. The more there are gases, the more time the lighter burns. Refilling again and again is not the thing which you might want from your pencil torch. So, think before buying.
5. Manufacturing quality:
If the pencil torch is made of bad or poor quality materials, it has the possibility of leaking gas. There are also chances where the torch might explode. So, read the product description carefully to check if the product is durable or not.
This is all, these are the primary things one should keep in mind before making a purchase. I have mentioned already, there are not many things to consider, but the primary and basic ones are the most important ones. Hope this guideline will be helpful for you.
This is what I had in store for you. A perfect pencil torch lighter is a multi-purpose unit. It is a must-have tool and is able to fulfill all of your fire requirements.
If you are a person who is creative and wants to make working with fire more simple, then buying a butane pencil torch can be a best deal for you.
If you are looking for the one for professional usage, then it would be better to go for Dremel 2000-01. The full set is a great kit to cut, fix, and join things with fire.
On the other hand, if you are looking for a pencil torch to solder, fixing jewelry, etc type of work.
Then Jet Pencil Flame 503 and PT-4000 are perfect for such usage. They have many things in common. Both of the pencils have come up with the best safety features as well as performance.
About the last two? They are the ones which offer good looks and performance. The WIOR Torch Lighter and the LONDAFISH pencil torch are built keeping the usage of household chores. Both of them are windproof and fulfills almost all sorts of fire requirements. You might be able to do a little bit of fixing or soldering by using them, but do not expect too much.
Now, it is up to you to make a decision. Make a choice as per your budget and requirements. The best decision leads to a great purchase. Best of luck!5 Best Pencil Torches (2020) – Reviews & Top Pick Are you willing to buy a pencil torch for soldering? Or are you a hobbyist who is planning to do some artwork on wood or soft metals? Do ]]>