Categories
BLOG

how to fix torch lighter

How to fix a torch lighter that won’t light?

Susi Neo
Oct 7 · 2 min read

Here’s a great question about torch flame lighters that have plagued cigars, lovers, for years: Tom B. wants to know, “Why do the brand new lighters I buy always seem to stop working not long after I purchase them… either they won’t light or the flame sputters.” Well, I’ve got the answer on how to fix that problem for good, so give this one a quick tutorial, now.

Butane lighters are convenient a n d often economical fire sources, but sometimes you will find it doesn’t work properly. To know how to make simple repairs at home can save you a costly manufacturer service repair or even having to replace the lighter with a new one.

First of all, follow the instructions that came with your butane lighter. They often have troubleshooting tips. Referring to the instructions for your exact lighter model will give you the most specific and helpful advice.

Press the ignition button or slide the cover, as required, to release butane gas into the burner chamber. Listen for the hiss of the gas as it leaves the lighter.

Adjust the flame height control — commonly located on the bottom of the lighter — with a blade screwdriver. Turn the flame adjustment toward plus or “+.” Try to light the butane lighter.

Bleed the tank to remove old butane fuel and any air that may be trapped. Press the fuel-fill valve with the screwdriver blade and hold to release the fuel and air.

Place the fill nozzle of a butane fuel can against the lighter’s fuel-fill valve. Push the can against the lighter for at least 10 seconds to transfer the butane to the lighter.

Clean the lighter’s burner chamber with compressed air. Insert the directional nozzle onto a can of compressed air. Hold the tip of the nozzle about 1 inch from the burner chamber. Direct several short blasts of air to remove any carbon deposits or debris.

Here’s a great question about torch flame lighters that have plagued cigars, lovers, for years: Tom B. wants to know, “Why do the brand new lighters I buy always seem to stop working not long after I…