How to Clean a Bong in Less Than 3 Minutes – The Ultimate Guide!
A clean bong is a happy bong, but some times you just don’t have the time to spend all day scrubbing and cleaning a bowl. There has to be a better way to keep your pot bong squeaky clean without the hassle.
There are a few quick ways to clean your bong parts at home:
- Purchasing a resin cleaner or any of the other smoking pipe cleaners,
- Using apple cider vinegar and baking soda for cleaning your bong,
- Making an alcohol vinegar cleaner,
- Boiling water in glass bongs,
- Using a combination of coarse salt and alcohol.
The method we will be focusing on in this guide is the alcohol and salt method, as we find it to be the most effective at the lowest cost. If you choose to clean bong with vinegar, it’s just as effective but make sure you use baking soda instead of salt.
Whatever cleaning method you choose, a bit of elbow grease goes a long way to increase your smoking experience.
Looking for a glass piece that’ll inspire a regular cleaning process?
The Panda Specialty Slab 18″ 9mm beaker bong from Mav may be just what you’re looking for.
Don’t let your bong sit around covered in grime, especially when cleaning is so simple! @littlestheadshop
Best way to clean a pipe
There are many different ways to go about cleaning a pipe, but our preferred method is with alcohol and salt. This method is one of the least expensive options, involving items most people keep in their homes. We prefer this method for cleaning glass bong bowls, but it can be useful for cleaning dab rig or a silicon bong.
Other common ways to remove resin buildup involve using bona fide bong cleaners such as Kryptonite or Formula 420. You’ll also find ways to clean with warm water, lemon juice and coarse salt, which is a great option for an all-natural cleaning method.
We don’t recommend using dish soap, and we definitely don’t recommend using carburetor cleaner, no matter how much resin buildup there is. There’s just no way to be sure you rinsed the chemicals from something like that off of your beautiful bong before lighting it back up again!
Here’s what you’ll need for our favorite way to clean glass bong:
- Warm Water
- 70% Unscented Isopropyl Alcohol or higher (the higher the percentage the better; we recommend 90% isopropyl alcohol)
- Salt – the coarser the better!
- Cotton swab or something like a q-tip
- Hand Towels
- Small baggies, storage containers, or mason jars
- Bottlebrush or pipe cleaner (optional)
With the Jay and Silent Bob Percolator Beaker Ice Bong, the desire for smooth tokes will persuade you to never commit the sins of hitting from a dirty bong.
Keep the resin build up clear and the bong water clean, and the smoke will rise from the beaker base, pass through the showerhead percolator and ice catch and cool every heavenly toke you take.
Supplies needed are minimal. You most likely already have them! @Green Rush All rights reserved.
How to clean a bong – step by step guide
Step One: Empty the bong and take it apart
Step Two: Rinse every piece of your bong with warm water
Step Three: Place each bong piece in its own container
Take all the loose pieces (except the bong base; that’ll be cleaned later) and place them in their own independent containers. Then, pour at least 1/4 cup of 70% (or higher) rubbing alcohol and at least one tablespoon of coarse salt in each container.
For the larger pieces that are in larger containers, we recommend using 1/2 cup of rubbing alcohol and two tablespoons of salt. Don’t stress over the proportions; they don’t have to be exact. This cleaning solution of isopropyl alcohol and coarse salt gives you some real cleaning power, as you’ll soon see!
Step Four: Shake the containers carefully
Seal the containers up and shake them carefully, but enough to get the mixture really moving inside. Be careful and ensure the container is safely sealed; these pieces are glass after all. This will help to move the salt/alcohol solution throughout the pieces of your bong, working to break up the marijuana residue built up inside.
Let the small pieces soak for 10 to 15 minutes and then return to shake again. This will help reduce the time you’ll need to spend scrubbing with bong brushes. This will also make it much easier to figure out how to get resin out of a bowl quickly if you don’t have a bong brush or bong cleaners.
Step Five: Cleaning the bong base – pour salt in the bong base
Pour two to three tablespoons of salt (we recommend three) into the base of your bond. If you have a bigger bong, you may need to add up to four or five tablespoons; use your best judgment.
You want to put enough salt in the bong that some remains undissolved in the solution to increase the abrasiveness, helping to loosen the bong resin.
Step Six: Add alcohol to the bong base
Step Seven: Plug the holes of the bong base and shake
Using your hand towels, plug the holes in your bong base to keep the alcohol inside as you shake it up. You can also just use your hand, plastic wrap, or even cotton balls if the holes are small enough. Or, if you have them, you can use bong plugs.
Shake the bong vigorously to get the alcohol/salt solution throughout all areas of the bong base, continuing for over five minutes. Remember, every minute you spend doing this is a minute less you have to scrub with a brush.
Step Eight: Rinse everything thoroughly with warm water
Just as you did initially, you’re going to want to rinse everything with warm water, the hottest water you can stand. This will ensure you get all the salt and alcohol out of the bong.
If some resin stains and/or water stains remain, as is often the case, break out the bong brush or some handy Q-tips to scrub it away. Once you’re done rinsing and scrubbing, rinse them again, then set them out to dry.
Interested in some of the finest products to help simplify the bong cleaning process? Check out some of our favorites!
|Bong Blaster Bong Cleaner Powder||Resölution Bong Cleaning and Transport Caps||Crud Bud Dual Tip Cotton Buds|
Tips for the best way to clean a weed pipe
Now that you know how to clean a glass weed pipe, it’s time to give you some pro-tips to ease the process.
- You can repeat this process, giving your pipe two thorough cleanings if you haven’t cleaned it in a while.
- Doing this monthly will make it easier to clean it in the future and prolong the life of your bong
- You can also boil vinegar to remove smoke odour
- Boiling alcohol is unnecessary
- Try to avoid inhaling rubbing alcohol
- Be careful to use only pipe cleaners, bong brushes, or Q-tips to scrub the resin off your piece so you can avoid tiny scratches from appearing on your glass bong.
You’ll be smiling when you have your reinvigorated glass. @sbbongcleaning
Now that you know how to clean a pipe with rubbing alcohol, you’re all set to properly maintain your bong in the cheapest and most effective way. As we said above, there are many ways to clean your bong, so if this method doesn’t work for you, don’t stop searching for the right one! This method can also work well on a silicone bong. Hopefully now you can see that, though you’ll need more than a quick rinse with running water, bong cleaning certainly doesn’t have to be a difficult or time consuming process, and it’s well worth it when you see your beautiful bong friend shining bright once again!
If you’d like to know more, you can research the following topics:
- Can I use hydrogen peroxide to clean my bong
- How to clean a pipe without alcohol
- How often should you clean your bong
- The best cleaner to use on your glass bong
- How to protect your bong from breaking
Cheers to clean bongs that make happy stoners! When cleaning your bong can be done in a small number of very easy steps there's really no excuse to let your precious glass sit there covered in residue! In this article we'll walk you through the steps needed to get your glass gleaming again. It really is so simple, so let's get started!
4 Simple Ways to Keep Your Pipe, Bubbler, Rig or Bong Clean
There is nothing that brings a sesh down faster than a dirty pipe , bubbler , rig , or bong chalked in a gross amount of resin. This article will break down how to clean each kind of glass in a few easy steps with the simplest ingredients.
These six household staples — sea salt, isopropyl (rubbing) alcohol, tap water, grain alcohol, baking soda, and vinegar — are common key ingredients that can turn your goopy piece brand spanking new.
How to Clean Pipes Using Rubbing Alcohol and Sea Salt
When it comes to bowls, Sherlocks, chillums, one-hitters, and steamrollers — sea salt and isopropyl alcohol are best. This combination of two popular household items is the quickest way to clean popular dry glass pieces.
- ¼ cup (67 grams) coarse sea salt
- 6-8 tablespoons (89-118 milliliters) isopropyl alcohol, enough to submerge the piece fully in the bag
- 1 large zipper storage bag
- Cotton swabs
- Metal tongs with rubber pads
- Add the glass piece inside the storage bag.
- Pour in the sea salt and isopropyl alcohol, then close the bag.
- Shake vigorously for 1 minute.
- Let the mixture soak sitting against a wall upright for 4-5 hours. (Make sure the glass piece is fully covered by the sea salt and isopropyl alcohol mixture.)
- Every hour, come back and shake for 1 minute.
- After 4-5 hours, the isopropyl alcohol mixture should become brown. This is all from the dissolved resin. Shake for 2-3 minutes to dislodge any resin plugs.
- Remove the pipe with tongs, and use a cotton swab to scrub any remaining sticky spots inside the pipe.
- Rinse under warm running tap water to clean your pipe fully and dry on a towel before use.
How to Clean Bubblers Using Vinegar and Heat
The beautiful child of a dry glass pipe and a bong, otherwise known as a bubbler, is best cleaned in boiled vinegar and water. So simple, right? Common household solvents such as isopropyl alcohol are safe when handled correctly, but solvents aren’t for everyone. This is where simple tap water and vinegar can come to the rescue.
- 2 cups (250 milliliters) tap water
- 2 cups (260-265 milliliters) white or apple cider vinegar
- Metal tongs with rubber pads
- Small bottle brush
- Small saucepan
- Add the water, vinegar, and bubbler to the small saucepan and bring to a boil. Reduce to a simmer or the lowest setting on the stove. Warning: Never place a cold pipe into boiling water. It will crack.
- Let the water simmer for 1 hour or until the water becomes dark amber.
- After 1 hour, gently pick up the bubbler and swish it around in the water to dislodge any plugs. Using a bottle brush, gently scrub the bubbler while plunged in the vinegar water.
- Gently remove the glass and rise under warm running tap water. Place onto a towel to cool and dry completely before use.
How to Clean Dab Rigs Using Grain Alcohol
Did you ever wonder if you could use the honey amber colored oil stuck within your oil rig? It’s called reclaim — and you can. Reclaim is decarboxylated , full of cannabinoids , and high in CBN . There is debate whether reclaim should be used, but as long as it isn’t reclaimed using a solvent, it should be safe, albeit undesirable to some. If you’re interested in adding it to edibles, use grain alcohol.
- 25.4 ounces (one 750 milliliter bottle) grain alcohol
- Glass 8-inch square baking dish
- Small rubber spatula
- Pour the grain alcohol into your rig until the inside is filled up fully. Place in a safe spot and let it soak for 24 hours.
- After 24 hours, plug the holes in the rig with your fingers and shake vigorously to dislodge the globs.
- Pour this mixture into the baking dish and cover with cheesecloth. Let the grain alcohol evaporate off for 1-2 days.
- Rise the rig under warm running water and place on a towel to dry.
- After the alcohol has been evaporated, scrape the honey oil from the dish.
How to Clean Bongs Using Baking Soda and Vinegar
No one likes a dirty bong. Thankfully, a little patience, baking soda, vinegar, and hot water will solve this problem. Note: These instructions are for bongs 18 inches or smaller
- 4 cups (about 1 liter) white or apple cider vinegar
- 2 cups (460 grams) baking soda, plus an additional ½ cup (115 grams) baking soda in reserve
- Tap water
- 19 ½-inch tall (50 centimeters) 40 quart/10 gallon (37.9 liters) stock pot
- Bottle brush or toothbrush
- Measuring cup
- Metal tongs with rubber pads
- 2 towels
- Place the bong into the stock pot. Pour in 1/2 cup (115 grams) baking soda down the bong stem. Pour the remaining 1 1/2 cups (345 grams) of baking soda into the bottom of the pot. Set the ½ cup baking soda in reserve to the side.
- Slowly pour 1 cup (250 milliliters) of vinegar down the bong stem. This will cause an instant fizzy reaction creating carbonic acid. This will quickly dissipate into carbon dioxide gas and fizzle out.
- Add the remaining vinegar to the pot. Let this sit for 5 minutes.
- Add enough water to fully cover the bong. Bring to a boil then reduce to a simmer.
- Watch the water level and do not let the bong become exposed to air, or else the bong will crack. Add more water if needed to keep it waterlogged.
- Simmer the water for 1-2 hours, depending on resin buildup.
- After the time is up, turn off the heat. Gently pull out the bong with the tongs and drain the liquid. Place onto a towel. Carefully pour the remaining reserve baking soda into the bong. Add a few tablespoons of the vinegar water to make a paste.
- Gently scrub the inside of the bong with a bottle brush or toothbrush.
- Rinse the bong out with warm tap water and place onto the second towel. Air dry fully before use.
Jessica Catalano is a professional cannabis chef, cannabis edibles expert, recipe developer, cannabis food writer, the pioneer of strain-specific cannabis cuisine, and author of The Ganja Kitchen Revolution: The Bible of Cannabis Cuisine published by Green Candy Press. Jessica explores the health benefits of using cannabis in everyday cooking, balanced nutrition, and an overall healthy lifestyle. Her penchant in life is to normalize cannabis through food and start the conversation one recipe at a time.4 Simple Ways to Keep Your Pipe, Bubbler, Rig or Bong Clean There is nothing that brings a sesh down faster than a dirty pipe , bubbler , rig , or bong chalked in a gross amount of resin. This ]]>