Categories
BLOG

dr dabber boost quartz nail

Boost: Black Edition Support

The Dr. Dabber Boost: Black is the first portable, battery-powered dab rig for essential oils, employing a domeless nail much like you would see in traditional glass dab rigs. There is no torch required. The device heats to an optimal temperature with a simple button press, making it one of the easiest dabbing solutions available. When attached to the included glass water filtration piece, the Boost replicates the dabbing experience perfectly. The Boost: Black truly is the best of both worlds: a portable dabbing experience without any sacrifice.

*Unfortunately, we no longer carry or cover the OG model of Boost unit under our warranty. Boost Black units are fully covered.*

Boost: Black Edition Basics

Boost: Black Heating:
Titanium Nail- 3 Click heat setting-White for 25 seconds, any time after turning Blue you may add your product.
Quartz & Ceramic Nails- 5 Click heat setting-Blue for 40 seconds, any time after turning White you may add your product.
You may turn the unit off at any time with 3 clicks.

Boost: Black Temperatures:
3 click: 450-550 on low heating cycle (white light, blue when temp is reached)
5 click: 550-650 on high heating cycle (blue light, white when temp is reached)
*varying on nails

Give your battery a full charge prior to using. Insert the Micro USB charger into the side of the Boost: Black, then insert the other side of the charger into a USB port or AC adapter. The power button shows a purple light when the device is being charged. A green light indicates charging is complete. Due to the size of the battery, it is recommended to charge 6-8 hours or overnight on an AC adapter to charge fully.

Try to remove the charging cord as soon as the unit is fully charged. The charging cord will not stop the trickle down effect, meaning it will slowly start to lose power over time after a full charge, while plugged in. You can always unplug and plug the unit back in to check if it needs a few more minutes for a full charge.

Compatible Items

We offer 3 nails that can be used with your Boost: Black. We recommend using the Boost: Black Titanium nail with the 3 click heat setting-White for 25 seconds any time after turning Blue you can add your product.

And recommend using the Boost: Black Quartz nail // Ceramic nail -with the 5 click heat setting-Blue for 40 seconds any time after turning White you can add your product.

The ceramic heating rod is a replacement component for the Boost: Black. This unit requires this component in order to function. Heating rod // Heating rod (serial)
Disclaimer: Before purchasing the Serial Replacement Heating Rod, verify that your Boost: Black has a serial number printed on the unit. The serial number can be found on the back of your unit below the charging port.

Our standard glass is factory made whereas our custom glass is handmade borosilicate glass, made in the USA by our resident glassblowers. The custom pieces are aimed more towards the connoisseur, although both types of glass function equally well.

Troubleshooting

If you need a bit more heat (especially for the quartz nail) you may run a pre-heat cycle before adding your product. To do this, run the unit through a heating cycle then immediately turn the unit back on and dab on the 2nd heating cycle.

A new ceramic heating rod will usually solve any issues with the Boost: Black unit. An extra ceramic heating rod is included with your kit and more may be purchased online. Your heating rods should last you about 3-6 months depending on usage.

You may also unscrew your battery from the housing to inspect the battery for any possible imperfections or wear/tear.

Find Us!

Feel free to check out our instruction videos by visiting our Dr. Dabber YouTube Channel or follow us on Instagram, Twitter, and Facebook.

Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Boost: Black Edition Boost Introduction The Dr. Dabber Boost: Black is the first portable, battery-powered dab rig for essential oils, employing a domeless nai

Boost: Black Edition User Manual

Use sensibly. Dr. Dabber products are intended for use by persons of legal smoking age. These products are not suitable for children, women who are pregnant or breastfeeding, or persons with heart disease, high blood pressure, hypertension or diabetes. These products should not be used in conjunction with medication for depression or asthma. Discontinue use and consult a physician immediately if you experience symptoms such as nausea, vomiting, dizziness, diarrhea, weakness, rapid heartbeat or hypertension.

Boost: Black Edition eRig
Glass Water Attachment
XL Domeless Titanium Nail (Threaded)
XL Ceramic Nail (Threaded)
XL Quartz Nail (Threaded)
Magnetic Carb Cap
Magnetic Loading Tool
Medical Grade Silicone Storage Container x2
Micro USB Charging Cable
Limited Edition Dr. Dabber Keychain

Register your Dr. Dabber product today to activate your warranty and receive helpful tips. This unit is under a one year Warranty on electronic components & battery. Visit DrDabber.com/Register to get started!

1. Use with caution. Must be 21 years of age or older to operate.
2. The nail becomes extremely hot. Do not touch once powered on.
3. Do not expose the device to direct sunlight.
4. Do not attempt to use the device without the glass attachment in place.
5. Do not attempt to place the device down on a surface without the base. The base is included to ensure proper weight distribution and to avoid damage to the glass attachment.
6. When the battery is low, indicator light will flash.
7. The light on the power button will flash 3 times to indicate a connection issue.
8. Charging: Charge device fully before use. The power button shows a purple light when the device is being charged.
9. Titanium Nail: Press the power button 3 times to heat titanium nail. The unit will begin with white light and change to blue light after 25 seconds indicating it is ready to use (nail will continue heating for 20 seconds before cutoff) • Temperature reaches 515°F after 25 seconds • Temperature reaches 610°F after 45 seconds
10. Ceramic/Quartz Nail: Press the power button 5 times to heat ceramic/quartz nail. The unit will begin with blue light and change to white light after 40 seconds indicating it is ready to use (nail will continue heating for 20 seconds before cutoff) • Temperature reaches 520°F after 40 seconds • Temperature reaches 600°F after 60 seconds
11. Do not heat the device more than 3 cycles continuously to avoid bodily harm or injury.
12. Do not use or charge in a motor vehicle.

HOW TO USE YOUR BOOST

1. Remove glass from unit and load from the top with water.
2. Click button to turn device on
-3 times for titanium nail
-5 times for ceramic/quartz nail
3. Load product on tip of tool
4. Once light changes color (Approx 30 seconds), touch tip of the tool to nail and begin to inhale through glass mouthpiece.
5. Once all product has melted off of tool, flip tool around and place carb cap on top of the nail to increase vapor density. (Generally 3-4 seconds)

CLEANING YOUR GLASS ATTACHMENT

To clean glass attachment, first remove the glass attachment from the eRig, then slowly pour 91% isopropyl alcohol, or higher, into the mouthpiece until the unit is about 1/4 full. Shake the attachment gently until clean. To rinse out the alcohol, pour water into the top (mouthpiece) until all alcohol is flushed out of the bottom of the attachment. To remove all water from device, blow through mouthpiece and shake gently.

SWAPPING OUT YOUR NAIL

WARNING: DO NOT ATTEMPT TO REMOVE NAIL WHEN HOT. REMOVE NAIL CAREFULLY WITHOUT BENDING OR TWISTING THE CERAMIC ELEMENT.

1.Turn nail clockwise to secure nail.

2.Turn nail counter clockwise to remove nail.

SWAPPING OUT YOUR CERAMIC ROD

WARNING: DO NOT ATTEMPT TO REMOVE CERAMIC ELEMENT WHEN HOT.

1.Pull up vertically on ceramic element to remove.

2.Push down on ceramic element to secure gold pins in place.

CHARGING YOUR DR. DABBER BOOST: BLACK

USB Port Connects to universal USB outlets.

Connecting Adapter Charge device fully before use. The power button shows a purple light when the device is being charged. Light will turn green when fully charged. Due to the size of the battery, it is recommended to charge 6-8 hours or use an AC adapter (Not Included) to speed up charging time.

Support Line 1(855) 362-3227 Support Email: [email protected]

For helpful tips and trick as well as all the latest accessories, head over to www.drdabber.com

Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Safety Information Use sensibly. Dr. Dabber products are intended for use by persons of legal smoking age. These products are not suitable for children, women w