How to Make Cannabis Coconut Oil (canna Oil)
Introduction: How to Make Cannabis Coconut Oil (canna Oil)
Cannabis coconut oil is a really versatile way to consume cannabis. It’s great taken alone or baked into all kinds of edibles – most strains of cannabis beautifully complement the flavor of coconut oil! Canna oil makes medicating super accessible, too – you can use indica, sativa, or even high CBD strains to get the desired effect you want.
It’s also super easy to make, and a great way to use up excess trim, kief or hash from harvest. In this instructable I’ll show you my favorite way to do it – simmering on the stove top! But I’ll tell you how to do it in a crockpot too.
This is a very fast and no-fuss version of canna oil – through lots of reading and quite a few experiments I really don’t believe it’s necessary to simmer it for-ev-errr and over complicate it. This method will give you a potent, tasty and fancy canna oil.
Step 1: What You’ll Need
- metal strainer/sieve
- bowl or large measuring cup
- jar or bowl to store the canna oil
- decarboxylated cannabis (buds, trim, kief, hash – 40 grams)
- unrefined coconut oil (2 cups)
We’ll talk a little about dosing on the next step.
Unsure how to decarboxylate cannabis? Click here to find out!
Step 2: Dosing + Strains + Expectations
(Pictured above – Doctor Who water hash, Doctor Who in bud form – so purple. Doctor Who sugar leaf trim)
What I’m using for this batch:
- 2 cups unrefined coconut oil
- 40 g Doctor Who trim, decarboxylated
This is a fairly strong dose – about 1.5 g of trim per tablespoon of canna oil. The medibles this canna oil makes will be used primarily for combating migraines so stronger is better!
Guidelines for dosing:
I recommend using anywhere from 0.5-1.5 g of trim/bud/hash/etc per tablespoon of oil. If this is your first time experimenting with canna oil, try using 16 grams of cannabis to 2 cups of oil.
When using buds, it’s okay to use less than you would if you were using trim as there will be more trichromes present and therefore more THC. If I was using buds instead of trim in this batch, I probably would have used 0.5 grams of bud per tablespoon of coconut oil.
For more information on dosing cannabis, I really recommend picking up a copy of The Ganja Kitchen Revolution by Jessica Catalano. The book includes a very nice dosing chart and explains how to demystify making edibles with the right amount of THC for you.
This article on The Cannabist also includes a helpful way of figuring out the THC content in edibles.
What to expect when using canna oil:
Cannabis taken orally a totally different beast – it can take you much longer to feel it, and the effects can linger much longer on average. Canna oil is often quite potent and can make you super sleepy, so never try a new dose when you have obligations later. 😉
You can try to combat sleepiness by using only sativas in your canna oil, or by choosing a strain high in CBD. But it might still make you a teeny bit tired (edibles always do that to some folks!), so always use caution.
What to do if you take too much canna oil:
If you ever take too much while trying to figure out the proper dose, don’t worry! You may feel anxious or wonder why you ever thought this was a good idea – but I promise it will pass and the benefits are worth it.
Your best bet is to drink a glass of water and lie down. Sleeping is always the best possible way to handle having a bit too much cannabis.
If sleep seems unreachable, try dimming the lights and putting on music or the TV. You can try talking to someone too. Whatever relaxes you! Just keep in mind that it will pass in a few hours at most.
Step 3: Combine the Coconut Oil and Cannabis and Simmer
Combine the cannabis and coconut oil in a small saucepan over the lowest heat you can manage.
Once the coconut oil has melted, let the mix simmer uncovered (stirring ever so often) for an hour.
HEY! If you’d like to do this in a crockpot you definitely can. Just let it go on low for a couple hours. It’s not necessary to take it longer than that.
If your canna oil turns out super green or not green at all, that’s fine. The green-ness relates only to the chlorophyll present, not how strong the canna oil is.
Step 4: Strain
For straining, use cheesecloth in a sieve over a large measuring cup. A sieve normally isn’t fine enough on its own! It won’t matter too much if you end up with particulates in the oil, but it always looks nicer without them.
Place two layers of cheesecloth in the sieve and put it over the measuring cup.
Pour the hot oil and cannabis mixture into the cheesecloth.
Let it drip for an hour or so and then squeeze the rest out by hand.
You can use the processed cannabis in other things once you’ve squeezed out the oil, but it shouldn’t have much THC left in it at all. One of the most awesome ways is to mix it with softened butter – you end up with an awesome cannabis compound butter that you can use on toast or maybe even put a dollop on a steak or under the skin of a chicken.
However, don’t feel bad if you just compost it or throw it out – nearly all the good stuff is in the canna oil now!
Step 5: Cool and Store
Pour the canna oil into a glass jar or bowl and leave uncovered until room temperature and beginning to solidify. (Leaving it uncovered is very important because we want to avoid condensation forming in the jar)
Once entirely cooled, close the container and store in the fridge or in a cool dark place. This will keep for up to a year!
See how dark it is before and how light it is when it solidifies? That’s what it should look like if you don’t simmer it too long and you’re not too rough with it. If you poked it a ton it might be more green.
Step 6: Using Cannabis Coconut Oil
You can consume this coconut canna oil on its own or use it in edibles!
If this is your first time trying it, I recommend taking 1/4-1/2 tablespoon by mouth to start. Wait at least 3-4 hours before taking more. How you feel after this will let you know if you need to increase or decrease your dose. It will also give you a baseline for edibles.
If making edibles, try using recipes you’ve made before. Knowing how many cookies, muffins, slices of cake, etc. that a recipe produces will allow you to figure out about how much THC per serving there is. (Because we know we’re using a certain amount of cannabis per tablespoon of coconut oil – you can determine the strength based on the amount of oil you used in the recipe and how many servings it makes)
Another good thing to keep in mind: you can even do half canna oil and half butter if you need the edibles to be a little less strong.
How to Make Cannabis Coconut Oil (canna Oil): Cannabis coconut oil is a really versatile way to consume cannabis. It's great taken alone or baked into all kinds of edibles – most strains of cannabis beautifully complement the flavor of coconut oil! Canna oil makes medicating super accessible, t…
How to Use Cannabis Oil
The use of marijuana for medical purposes has opened up a market for infusing oils with Tetrahydrocannabinol, otherwise know as THC. As we all know THC is the psychoactive substance that gives users the effects they are looking for when they consume marijuana. As the health benefits of marijuana have become widely acknowledged, consumers have begun cooking with weed oils as part of their regular diets. This blog is meant to explain the process on how to make THC oils, provides tips for making infused products and most importantly shows you eight ways to use marijuana oils.
TABLE OF CONTENTS
How Do I Prepare Cannabis To Make Weed Oil?
The first step is to decarboxylate your flower. If you are unsure of how to do this, here’s an article on how to decarboxylate cannabis, and here’s another explaining what decarboxylation is.
Decarbing your cannabis before infusion is a critical step before making any sort of canna oil. You can go with an oil you prefer, as it is often comes down to personal preference regarding which oil is better to infuse with cannabis. To get the most out of your decarbed cannabis, choose an oil with good infusion rates. You can see more about the infusion efficiency of different oils here. Once you figure out which oil you want to use, whether it is coconut oil, olive oil or something more exotic it is time to begin the infusion process. That involves infusing the decarbed product with your oil of choice.
If you have the NOVA, place the oil and decarbed cannabis inside for the infusion process. Ideally, do not grind it but rather break it up into popcorn sized nugs, but it is fine to use shake or ground bud as well. Throw your cannabis right in your decarboxylator (putting it in silicon or a shot glass if you’re using kief/concentrates) and let it run its cycle while you gather your ingredients.
How To Infuse The Oil?
When you have finished decarbing you will want to do a quick infusion with your oil. For the oil to get infused with the THC it needs to get heated thoroughly and evenly. Providing too much heat or too little heat will affect the process. Uneven heating will also impact the process.
When your canna oil is done infusing, remove any plant matter by carefully straining it through cheesecloth (available in the cooking section of stores like Target or Walmart) or a coffee filter. Pour your infused oil into a container and you’re done! If you are looking to make cannabutter, be sure to place it in the fridge to harden. Canna oils, on the other hand, are fine to store on the counter. The most important thing is to keep it in an airtight container (mason jars work great) in a cool, dark space.
Now, there are differences of opinion on how long to infuse cannabis oil. Some who feel the infusion process must be at low heat for 6 hours or more while others believe that the time can be cut short. Take the guessing out of accurately measuring your dosages and how long it takes to infuse THC oil with the NOVA Decarboxylator. The overall objective is to retain as much THC from the material as possible, and we have the testing results to show the effectiveness of the Ardent infusion process
How To Accurately Measure Dosage
The ideal ratio for making weed oil is to calculate the amount of cannabis it will take to get the THC dosage that you want, and then mix with the desired amount of oil. It is important to understand the dosage that you want for your oils before you start infusing the marijuana.
Typically decarbed cannabis flower has between 5-20% THC content, which means about 50-200mg of THC in every gram of decarbed flower. It may be more or less depending on how the plant was grown. You can use more or less decarbed cannabis in your infusion to dial the dose up or down. After infusion, you can separate the material from the infused oil. For even cleaner oil, use a fine screen to remove the decarbed marijuana from the oil after infusion.
Many consumers enjoy making THC oil with coconut oil due to its ability to mask the taste of cannabis. As there are a growing number of edible users who don’t like the taste of marijuana.
How To Use THC Oil
Once the infusion process is complete and you have poured the filtered cannaoil into a container, the next commonly asked question is “how to use thc oil?” There’s really no end to what you can do with THC oil. Again, based on yours interests, a dessert, toast or any dish which uses butter or oil can be made. How much can go into each of these dishes will be based on the recipe of the dish.
If you are not sure on how to measure the dosages of cannabis, you can read our guide on accurately dosing cannabis by taking THC measurements. In a medical situation it’s advised to consult your doctor on how much marijuana you should consume for each dosage. Many consumers use a dropper with the oil decanter to measure the amount of oil used each time. Whether you are making brownies or chocolates at home you can measure the dosages based on the amount of decarbed cannabis used to make the cannabutter or canna oil.
How To Use Cannabis Oil (8 Best Ways)
All of these activities are home-based. This means you can handle the preparation of weed oil or cannabutter and the subsequent dishes on your spare time. As long as you have all the ingredients and the equipment to get it done correctly, the process is simple and can quickly save you a lot of money quickly. The Ardent NOVA Decarboxyolator is the perfect tool if you are looking for the best way to decarb cannabis to make THC oil without wasting time or material.
If you wish to add flower to your food intake, there are multiple options to do it depending on your taste and personal preferences. There are plenty of canna oil recipes that you can use. Don’t forget there are also benefits of using decarbed cannabis without going through the infusion process. There are even recipes for making cannabis ice cream. Since there are a lot of ways to use canna oil and cannabutter, we put together a list of uses, along with the best oils for each one. You can also see this next link for more information on the best oil to infuse THC.
Using cannabutter or alternatives such as cannabis canola (here’s how to make edibles without butter) oil in baked goods are classic ways to make edibles, but a lot of people have started using cannabis coconut oil in their favorite sweet treats since it’s vegan and paleo-friendly. You can also use infused olive oil in your baked goods although it’s important to know that most olive oils have a strong flavor that may change the flavor of your finished goodie.
Cooking with weed oils like olive, peanut, or canola are great ways to inject THC into your meal. Cook with it as you would normally, just be mindful of how much you’re using since the effects of ingesting cannabis are slower to set in and last much longer than smoking. Ideas: saute veggies, roast potatoes, marinate meat, or mix up a vinaigrette for your favorite salad.
If you’re already using cannacaps or want to start, infused coconut oil is a great addition to your capsules. Because coconut oil has a high saturated fat content, it helps your body best absorb the cannabinoids, delivering a stronger effect per dose of medicine (THC and CBD) than other oils. In addition, coconut oil has a long shelf life, meaning that cannacaps made with this oil will last an extremely long time (especially if stored in the fridge or freezer!)
4. Pain Salve
Cannabis-infused salves and topicals deliver quick pain relief and a feeling of relaxation to your muscles, without any psychoactive effects. Coconut oil infusions are a good choice for creating your own pain salves because coconut oil is a great transporter of CBD from your skin into your body’s cannabinoid receptors. Better CBD absorption means more relief for sore muscles, arthritis, and other localized pains. It also becomes as easy as adding your infused coconut oil into a non-cannabis product you already own and love!
In addition to pain salves and balms, cannabis coconut oil is a great addition to almost any skincare routine. Mixed with aloe vera and vitamin E, it makes a great lotion for everyday use or for healing sunburns. Some skincare gurus swear by cannabis coconut oil as a facial moisturizer, claiming that with regular use, you’ll get a glowy complexion and see the anti-aging effects of cannabis.
Cannaoil in your smoothie? Yes! Due to its reputation as a superfood and the creamy texture that results from blending coconut oil, it has become a popular addition to smoothies. There are a lot of cannabis recipes out there but you can experiment by adding a tablespoon of cannabis coconut oil or less if your infusion is strong (5-10 mg is a good starting point) to your favorite smoothie recipe.
Adding cannabutter or cannaoil to your tea may sound strange, but it actually results in a creamy, latte-like drink. As far as oil goes, coconut oil is the best choice due to the flavor and the fact that unlike other oils, it gets creamy when mixed up. Just brew a cup of your favorite tea and stir in the cannabutter or cannabis coconut oil until it’s mixed well. The result is a warm, comforting, medicinal cuppa, sure to make you feel good.
“Bulletproof coffee”, coffee with unsalted butter or coconut oil in place of cream or milk, has exploded in popularity over the past few years. It’s a staple in paleo and keto diets and many vegans enjoy the coconut oil version. Of course, mixing in cannabutter or cannabis coconut oil is a great way to get the perceived benefits of bulletproof coffee along with a healthy dose of THC. Stir into your favorite brew, or put it in the blender for a frothy morning drink.
Additional Canna Oil Recipes
If you are wondering what type of dishes to prepare with your canna oil, we recommend several different ways of eating decarbed weed in our recipes. Whether you are looking to make baked goods, alcoholic drinks using weed oil, or infused recipes for food, the possibilities are endless. Some of our most popular canna recipes include:
Keep in mind the proper dosages for your recipe of choice. We must also note that the consumption of marijuana for is age-restricted. If there are children at home, take all proper precautions to ensure they don’t ingest weed oil or cannabis butter or accidentally add it to their food.
Perfect Decarb Tool
If you are looking for the best way to decarb marijuana, we recommend you purchase the Ardent NOVA Decarboxylator to get the perfect decarb each time. Whether you are looking to make canna oil or cannabutter. Our goal is to provide some inspiration for your cannabis cooking adventures. Whether you’re a recreational or medicinal user, there are lots of ways for you to use cannabutter or canna oil in the kitchen. Share your favorite recipe in the comments!
There are also direct uses of THC oil. Some people decide to put a few drops of the oil below their tongue for it to have an almost immediate sublingual effect. As mentioned earlier, using coconut and sweeter oils in the preparation of your canna oil will help remove the odor and give it a better smell. Lastly, savory canna oils pair better with more savory dishes, just as you would expect.
How to use cannabis oil to best effect it's not all about baking canna oil recipes! 8 tips on using THC oil to put your weed to good use!